For more information about purchasing, permitting, particulate filters and other issues:
Contact Miranda Monge at EH&S (mirandam17@berkeley.edu).
Generator Specifications
It is crucial that you contact EH&S before purchasing your generator to ensure that it meets current emission requirements. If a generator is purchased that does not meet emissions criteria, it cannot be permitted and installed.
If you generator is:
- Larger than 50 horsepower (hp): You are required to permit the generator and comply with BAAQMD-administered Statewide Air Toxics Control Measure (ATCM).
- Less than or equal to 50 horsepower (hp): You are not required to permit the generator, but please contact EH&S for additional requirements.
Does your generator set meet air quality regulations?
Currently, the ATCM for new emergency generators has an emission requirement of 0.15 grams per break horsepower-hour (g/bhp-hr) for particulate matter (PM) in addition to emission requirements for NOx and CO which are based on engine power and model year. These emission requirements are outlined in the current regulation, which can be found on the California Air Resources Board website.
Permit Process
The permit process can take up to 8 months to complete. A general timeline of the process is as follows:
Steps | Timeline |
Step 1: Begin the permit process EH&S prepares the documents. However, detailed information required for the permit application must be provided to EH&S by the Project in order to have a comprehensive submittal. |
|
Step 2: EH&S will prepare the permit application forms |
1 to 3 weeks |
Step 3: EH&S submits permit application forms to BAAQMD | |
Step 4: BAAQMD Review |
1 week to 4 months |
Step 5: Receive invoice; Project pays invoice |
30 days |
Step 6: BAAQMD Review |
1 week to 4 months |
Step 7: BAAQMD sends “Authority to Construct” to EH&S |
|
Step 8: Start Up Notification |
|
Step 9: BAAQMD sends “Permit to Operate” to EH&S |
1 week to 2 months |
Recordkeeping
All standby generators are required to be maintained monthly. The owning department should keep a log that indicates:
- Date
- Hours of operation for reliability-related activities (maintenance and testing)
- Hours of operation for emission testing
- Hours of operation for emergency
- For each emergency, the nature of the emergency condition
- Receipts of fuel purchased
Note: The owning department is expected to comply with all terms and conditions in the Permit to Operate.
Frequently Asked Questions (FAQs)
Who prepares the submittal to the BAAQMD for a permit?
UC Berkeley’s Office of Environment, Health & Safety (EH&S) prepares the documents. However, detailed information required for the permit application must be provided to EH&S by the Project in order to have a comprehensive submittal.
Do I need to obtain a permit for diesel emergency generators?
Yes. Most new emergency generators will require an operating permit through the Bay Area Air Quality Management District (BAAQMD). All stationary internal combustion engines larger than 50 horsepower must:
- Obtain a BAAQMD Permit to Operate
- Comply with the BAAQMD-administered Statewide Air Toxics Control Measure (ATCM) for stationary diesel engines
What other issues do I need to consider?
Technologies such as diesel particulate filters can significantly reduce diesel particulate emissions, but also have maintenance issues that should be taken into account. At this time, particulate filters or other abatement devices are generally not required to be installed. This requirement is subject to change. Please contact EH&S for additional information.
What is the timeline for the permit process?
See Permit Process.
What is the Stationary Engine Air Toxic Control Measure (ATCM) and what applies to this standard?
The Stationary Engine Air Toxic Control Measure (ATCM) was adopted by the California Air Resources Board (CARB) in 2004 and is implemented by BAAQMD. The ATCM standard applies to diesel emergency standby engines and establishes emission standards and operating requirements, fuel use requirements and reporting requirements.
What are the emission requirements for the Stationary Engine Engine Air Toxic Control Measure (ATCM)?
See ATCM.